Press "Enter" to skip to content

Tag: Hofmeister

This site contains Ebay partner affiliate links, which may earn us a commission at no additional cost to you.

1967 BMW 1800

A few years ago I did a deep dive into the evolution of BMW’s early sedans:

1968 BMW 1800

The result of that evolution we looked at was the famous 2002, but before that model emerged there were several baby steps along the way. Today’s car is one of them; the 1800 sedan, and we also just looked at the 2000C recently. While this particular 1800 looks similar to the car I looked at back in 2020, it’s a year older and has quite a few mods. The market has also moved on substantially from 2020, so let’s see what the resulting asking price equates to:

CLICK FOR DETAILS: 1967 BMW 1800 on eBay

Comments closed

1965 BMW 2000C

Stepping even a bit further back in BMW’s timeline, today we have a Neue Klasse Coupe. The E120 was an evolution of the Bertone 3200CS design from the early 1960s, but BMW’s design head – one very famous Mr. Wilhelm Hofmeister – certainly added his own distinctive flair. However, he wasn’t alone – some of the most famous car designers from the period had influence – from the aforementioned Bertone, Giugiaro, and of course Michelotti (designer of the 700 series as well) all had a hand.

While the lines looked exotic, underneath the chassis and drivetrain were borrowed straight from the more pedestrian Neue Klasse sedans. Power came from the venerable 2.0 inline-4 M10 fed by twin Solex carbs. The CS had the higher compression (9.3:1) 120 horsepower version, while the C and CA made due with 100. This was still a huge step for BMW, who lacked the capability to produce the complex body structure on its normal assembly lines. As a result, like its successors the E9 and early E24 models, the 2000C, CA and CS Coupes would be produced by Karmann in Osnabrück. A total of approximately 13,691 were produced between its 1965 launch and the takeover of the 2800CS introduction in 1968.

So, they’re old, a bit quirky-looking by BMW standards, and rare. That certainly makes for the potential for a collector car! Let’s check out this first-year 2000C:

CLICK FOR DETAILS: 1965 BMW 2000C on eBay

1 Comment

1967 BMW 2000CS

Stepping even a bit further back in BMW’s timeline, today we have a Neue Klasse Coupe. The E120 was as evolution of the Bertone 3200CS design from the early 1960s, but BMW’s design head – one very famous Mr. Wilhelm Hofmeister – certainly added his own distinctive flair. However, he wasn’t alone – some of the most famous car designers from the period had influence – from the aforementioned Bertone, Giugiaro, and of course Michelotti (designer of the 700 series as well) all had a hand.

While the lines looked exotic, underneath the chassis and drivetrain were borrowed straight from the more pedestrian Neue Klasse sedans. Power came from the venerable 2.0 inline-4 M10 fed by twin Solex carbs. The CS had the higher compression (9.3:1) 120 horsepower version, while the C and CA made due with 100. This was still a huge step for BMW, who lacked the capability to produce the complex body structure on its normal assembly lines. As a result, like its successors the E9 and early E24 models, the 2000C, CA and CS Coupes would be produced by Karmann in Osnabrück. A total of approximately 13,691 were produced between its 1965 launch and the takeover of the 2800CS introduction in 1968.

So, they’re old, a bit quirky-looking by BMW standards, and rare. That certainly makes for the potential for a collector car! And this one is claimed to be a mostly original survivor, to boot:

CLICK FOR DETAILS: 1967 BMW 2000CS on eBay

3 Comments