Press "Enter" to skip to content

Tag: Rare

This site contains Ebay partner affiliate links, which may earn us a commission at no additional cost to you.

1997 Audi A4 2.8 quattro

Emerging from the sales slump brought on by the recession and actual fake news, Audi solidified its position in the small executive luxury market with its brand new A4 model in 1996. While in truth the car heavily borrowed from the evolution of the B3/4 series and started life with the same flaccid 12 valve V6 that had replaced the sonorous 7A inline-5 for 1993, the A4 was exactly the model Audi needed to redefine its image.

And redefine it did, going from near zero to hero in just a year’s time.

Car and Driver
immediately named the A4 one of its “10 Best” cars, a position it would repeat in 1997 and 1998. Okay, maybe it wasn’t the perennial favorite as the BMW 3-series was for the magazine, but still, that it was mentioned in the same breath was impressive. New sheetmetal was smooth and tight, full of great angles and well-placed curves. The bumper covers were finally integrated well again – something the U.S. specification B4 had inexplicably failed miserably at. Inside was evolution rather than revolution, but the cabin looked and felt upscale and modern. And the market responded to this instant hit; consider, in 1994 Audi sold 12,575 cars in total. In 1996, some 15,288 of just the A4 models were sold. That was before the many variations and improvements Audi rolled out in the B5, too.

Seemingly every year new changes offered refreshment and redesign to the A4. In late 1995 and 1996, you could only get one specification – the 2.8 either with or without quattro. But ’97 saw the introduction of the 1.8T, and the Sport Package got some revisions as well with new Ronal ‘Swing’ 16″ wheels. Today’s Laser Red example has to be one of the better examples out there:

CLICK FOR DETAILS: 1997 Audi A4 2.8 quattro on eBay

3 Comments

1989 BMW Z1

BMW took a big leap at the end of the 1980s and introduced some pretty extreme design language. First was the E31 8-series, a seeming quantum leap from the outgoing 6-series. That chassis pioneered, for better or worse, a tremendous amount of technical and electronic innovation for BMW. The 8s relied on a bevy of computers to control its chassis, electronic suite and engine. Side by side with the more famous Grand Tourer though was a diminutive roadster BMW produced based heavily on the E30 chassis. Instead of a heavy reliance on computer technology, the futuristic (hence Z for the German word for future – Zukunft) plastic bodied Z1 looked like a supercar even if it didn’t go like one. Park one next to a E30 convertible and you’d never know the two are related!

The Z1 was a complete departure for BMW; while they were not strangers to small cabriolets, their previous efforts were in the 1930s with the 315/1 and the 1960s with the 700. BMW went away from the idea of an integral body and frame to a separate chassis with removable, plastic body pieces. The idea was that the owners could replace the panels themselves to “repaint” the car with minimal effort. It was something the Smart car would be notable for – a car that launched a decade following the Z1. To get the paint to adhere to the bodywork, BMW had to partner with AZKO coatings to develop a flexible paint which they termed ‘Varioflex’, while the bodywork had to be attached using a unique elastic joint technique. The doors didn’t open out – they slid down into the supporting chassis structure. The underbody was flat, not only for aerodynamics, but the tray turned into a diffuser towards the back, assisting in sticking the rear to the ground as speeds rose. In front was nothing new: the venerable M20 from the E30 popped up here, too – but in the rear the Z1 was new with a multi-link rear axle of its own. This new design would later be incorporated into the E36. It’s interesting that with the Z3 BMW opted to go the opposite route and incorporate earlier E30 pieces into the rear of the /7 and /8. While performance was relatively leisurely, the Z1 nevertheless garnered praise for its innovation, unique design and great looks. They never made it to U.S. shores and only around 8,000 examples were ever produced, but a few have crossed the Atlantic now that they’re old enough to be more easily imported:

CLICK FOR DETAILS: 1989 BMW Z1 on eBay

1 Comment

1963 Volkswagen Karmann Ghia Type 34

The Type 34 Karmann Ghia was a sales failure – it was too expensive – costing about 50% more than a normal Type 14 Ghia. But that didn’t mean it wasn’t a very good looking failure. While the underpinnings were shared with its less exotic 1500 cousins, the upscale Karmann Ghia was aimed squarely at making peasants feel like landed gentry and certainly looked the part. Sweeping character lines ran the length of the car, giving it its signature ‘razor’ nickname. Added to the upscale look in terms of desirability today is rarity. Never imported to the United States, Type 34 production only achieved about 42,500 units – less than 10% of the total number of the more popular and familiar Type 14 Karmann Ghia. Today’s light green example is great to see:

CLICK FOR DETAILS: 1963 Volkswagen Karmann Ghia Type 34 on eBay

Comments closed

1932 BMW 3/20 AM-4

Okay, it might look odd, and not like much…but, this is genesis if you are a BMW fan.

BMW’s first car was actually not of their making; it was the 3/15 it inherited with the acquisition of Dixi, itself a reorganization of Fahrzeugfabrik Eisenach, in 1928. The Dixi 3/15 was, in fact, a licensed copy of the Austin 7 – and while BMW renamed the car the 3/15 DA-2 in 1929, that is pretty much all they did. However, in 1932 BMW launched its first full-fledged car design. While it looked quite similar to the outgoing 3/15, the exterior of the 3/20 belied many changes under the skin.

The new 3/20 had a different chassis underneath, and though the body looked very similar to the 3/15 it was now assembled by Daimler-Benz in Sindelfingen. The front suspension was carried over from the 3/15 (meaning it was in large part Austin parts), as was the engine – though it was upgraded to generate 20 horsepower, with a net taxable horsepower of 3 (hence the name 3/20). BMW fiddled with the rear suspension, and added a transverse leaf-spring swing axle. Like the 3/15, these were built in Eisenach – which would go on later to built the ‘EMW‘s I talked about back in June. Production of the 3/20 lasted only three years until 1934, when it was replaced by the heavily revised 309, the first car to sport BMW’s famous kidney grille design.

These are quite rare cars to find at all, but one popped up for sale so let’s take a look!

CLICK FOR DETAILS: 1932 BMW 3/20 AM-4 on eBay

1 Comment

1971 BMW Bavaria

The Bavaria was BMW’s bold attempt to redefine its market presence in a large way…or, perhaps more correctly, to redefine it’s large-car market presence in some way. What predated this design was the BMW 501 and 502 – the ‘Baroque Angels’ – which looked more like they were out of a black-and-white film than ready for the Jet Age by the time of the end of their production in the early 1960s. BMW took a break to get its Neue Klasse feet under it, then in the late 1960s introduced its new six-cylinder-powered 2500 and 2800 sedans. Moving into the 1970s, the M30s engine was punched out to 3.0 liters and the model was offered here as the Bavaria.

A handsome design in its own right, like the E12 and early E24s it suffered some teething pains before the the replacement models really caught fire in the early 1980s. Finding a clean Bavaria today is indeed quite a treat!

CLICK FOR DETAILS: 1971 BMW Bavaria on eBay

2 Comments